NETGEAR DM200 User Manual Download | Manualshive

Page: 97 / 107

background image

If the error persists, a hardware problem might exist. For recovery instructions or help with a hardware
problem, contact technical support at

netgear.com/support

.

Power LED Remains Solid Amber

During the startup process, the Power LED lights solid amber for about 40 seconds and then turns solid
green, indicating that the startup procedure is complete and the modem is ready.

If the Power LED remains solid amber and does not turn solid green, a failure occurred or the modem is
malfunctioning.

If the Power LED does not turn solid green, do the following:

1.

Turn the power off and back on and wait several minutes to see if the modem recovers.

2.

If the modem does not recover, press and hold the Reset button to return the modem to its factory
settings.

If the error persists, a hardware problem might exist. For recovery instructions or help with a hardware
problem, contact technical support at

netgear.com/support

.

You Cannot Log In to the Modem

If you are unable to log in to the modem from a computer and use the modem web pages, check the following:

•

Check the Ethernet connection between the computer and the modem.

•

Make sure that the IP address of your computer is on the same subnet as the modem. If you are using
the recommended addressing scheme, your computer’s address is in the range of 192.168.5.2 to
192.168.5.254.

•

Make sure that your computer can reach the modem’s DHCP server. Recent versions of Windows and
Mac OS generate and assign an IP address if the computer cannot reach a DHCP server. These
autogenerated addresses are in the range of 169.254.x.x. If your IP address is in this range, check the
connection from the computer to the modem and reboot your computer.

•

If your modem’s IP address was changed and you do not know the current IP address, clear the modem’s
configuration to factory defaults. This sets the modem’s IP address to 192.168.5.1. For more information,
see

Return the Modem to Its Factory Default Settings

on page 76 and

Factory Settings

•

Make sure that Java, JavaScript, or ActiveX is enabled in your browser. If you are using Internet Explorer,
click the Refresh button to be sure that the Java applet is loaded.

•

Try quitting the browser and launching it again.

•

Make sure that you are using the correct login information. The user name is admin, and the default
password is password. Make sure that Caps Lock is off when you enter this information.

Troubleshoot the Internet Connection

If your modem cannot access the Internet, check the DSL connection, then the WAN TCP/IP connection.

Troubleshooting

97

Broadband High-Speed DSL Modem Model DM200

«
...
95
96
97
98
99
...
»

Summary of Contents for DM200












































































































Reviews:

No comments

Related manuals for DM200

Brand: A-Link Pages: 8

Brand: Hach Pages: 112

Brand: MailASail Pages: 2

Brand: Patton electronics Pages: 20

Brand: Patton electronics Pages: 8

Brand: Patton electronics Pages: 5

DU-562M - 56 Kbps Fax

Brand: D-Link Pages: 31

Brand: Abocom Pages: 14

Brand: Air Live Pages: 30

Ripwave 2300E/U

Brand: Navini Networks Pages: 48

Brand: US Robotics Pages: 27

Brand: Nokia Pages: 62

Brand: Racelogic Pages: 6

Brand: Zte Pages: 11

Brand: OptConnect Pages: 17

Brand: OptConnect Pages: 24

Brand: Alfa Network Pages: 1

Brand: 3 Com U.S. Robotics Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands