manualshive.com logo in svg

NETGEAR DM200, User Manual

Share
Download
NETGEAR DM200 User Manual Download Page 83

View, Renew, or Release the TCP/IP Internet Connection

You can view information about a TCP/IP Internet connection of the modem and renew or release such a
connection. This information displays only if the modem connects to the ISP network over a TCP/IP
connection. Such a connection usually functions over an Ethernet WAN connection.

To view the status of the TCP/IP Internet connection or renew or release the TCP/IP Internet
connection:

1.

Launch a web browser from a computer that is connected to the network.

2.

Enter http://www.routerlogin.net.

A login window opens.

3.

Enter the modem user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

4.

Select ADVANCED > ADVANCED Home.

The ADVANCED Home page displays.

5.

In the Internet Port pane, click the Connection Status button.

The Connection Status pop-up window opens. The fields that display depend on the type of Internet
connection.

The following table describes the fields for a TCP/IP connection with DHCP.

Description

Field

The IP address that is assigned by the ISP to the modem.

IP Address

The subnet mask that is assigned by the ISP to the modem.

Subnet Mask

The IP address of the default gateway of the ISP that the modem communicates with.

Default Gateway

The IP address of the DHCP server of the ISP that issues the IP address to the modem.

DHCP Server

The IP address of the Domain Name System (DNS) server of the ISP that provides
translation of network names to IP addresses.

DNS Server

The time at which the modem obtained the DHCP lease. (The type of DHCP connection
determines whether this field displays onscreen.)

Lease Obtained

The time at which the DHCP lease expires. (The type of DHCP connection determines
whether this field displays onscreen.)

Lease Expires

6.

To renew the Internet connection when the connection is active, click the Renew button.

7.

To terminate the Internet connection when the connection is active, click the Release button.

8.

Click the Close Window button.

The pop-up window closes.

Manage the Modem and Monitor the Traffic

83

Broadband High-Speed DSL Modem Model DM200

Summary of Contents for DM200












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands