background image

The modem checks the Internet connection.

If the Configuring the Internet Connection page displays, skip to

 Step 10

. If the page does not display,

see

 Step 8

.

8.

If the Configuring the Internet Connection page does not display, do the following:

a.

In the address field of the web browser, enter www.routerlogin.net.

b.

When prompted, enter admin for the user name and password for the password.

If the Configuring the Internet Connection page displays, skip to

 Step 10

. If the page still does not display,

see

 Step 9

.

9.

If the browser cannot display the web page, do the following:

a.

Make sure that the computer is connected to the Ethernet LAN port of the modem.

b.

Make sure that the Power LED   of the modem is lit solid green.

c.

Make sure that your browser does not cache the previous page by closing and reopening the
browser.

d.

Clear the browser cache.

e.

If the computer is set to a static (fixed) IP address (this setting is uncommon), either change the
computer to obtain an IP address automatically from the modem through DHCP, or change the IP
address of the computer to a static IP address in the 192.168.5.2–192.168.5.254 range.

10.

From the Country menu, select the country in which you use the modem.

11.

From the Internet Service Provider menu, select the Internet service provider (ISP) that you are using.

Install and Access the Modem

15

Broadband High-Speed DSL Modem Model DM200

Summary of Contents for DM200












































































































Reviews: