NETGEAR VPN Configuration
170
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
Note:
In this example, the connection name on the client side of the VPN
tunnel is toGW_A. It does not have to match the VPN_client connection name
used on the gateway side of the VPN tunnel because connection names do not
affect how the VPN tunnel functions.
d.
In the Connection Security section, select
Secure
.
toGW_A
e.
In the ID Type drop-down list, select
IP Subnet
.
f.
In this example, in the
Subnet
field, type
192.168.0.1
as the network address of the
wireless modem router.
g.
In the
Mask
field, enter
255.255.255.0
as the LAN subnet mask of the wireless
modem router.
h.
In the Protocol drop-down list, select
All
to allow all traffic through the VPN tunnel.
i.
Select the
Connect
using
Secure Gateway Tunnel
check box.
j.
In the ID Type drop-down list, select
Domain Name
, and enter
fromGW_A.com
(in
this example).
k.
Select
Gateway Hostname
and enter
ntgr.dyndns.org
(in this example).
3.
Configure the security policy in the wireless modem router software.