NETGEAR VPN Configuration
162
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
b.
Type
ping 172.23.9
.
If the pings fail the first time, try the pings a second time.
Wireless Modem Router with FQDN to Gateway B
This section is a case study on how to configure a VPN tunnel from a NETGEAR wireless
modem router to a gateway using a fully qualified domain name (FQDN) to resolve the public
address of one or both routers. This case study follows the VPN Consortium interoperability
profile guidelines (found at
http://www.vpnc.org/InteropProfiles/Interop-01.html
).
Configuration Profile
The configuration in this section follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather the necessary information before you begin configuration.
Verify that the firmware is up to date, and that you have all the addresses and parameters to
be set on both sides. Check that there are no firewall restrictions.
Gateway A
WAN IP
Internet
10.506.0/24
(DGND3700)
LAN IP
10.5.6.1
example.org
WAN IP
example2.org
Gateway B
LAN IP
172.23.9.1
172.23.9.0/24
(FQDN)
(FQDN)
Figure 63. VPNC example, network interface addressing
Table 25. Wireless modem router with FQDN to Gateway B profile summary
VPN Consortium Scenario
Scenario 1
Type of VPN
LAN-to-LAN or gateway-to-gateway (not PC/client-to-gateway)
Security scheme:
IKE with pre-shared secret/key (not certificate based)
IP addressing: