How to setup a roaming wireless network between Edimax Pro APs?
Topology
Before roaming, Please make sure that must be a overlap region between Edimax Pro 1 and
Edimax Pro AP 2.
As you can see as below, the smart phone is not able to roam from Edimax Pro AP 1 to
Edimax Pro AP 2. Because “Roaming” means the client detects multiple SSID at the same
time, and choose better wireless signal to connect with.
As above, there is no overlap region between Edimax Pro 1 and Edimax Pro 2. While client
walks to region A, it detects no signal, and it will just disconnection from the wireless
network. There would be no wireless roaming.
So if you would like to have good roaming experience, you need to make sure there is
overlap region between Edimax Pro AP 1 and Edimax Pro AP 2 as below.
