Virtual Private Networking
104
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
Note:
See
Use Auto Policy to Configure VPN Tunnels
on page
112 for
information about how to enable the IKE keep-alive capability on an
existing VPN tunnel.
6.
Repeat these steps for the gateway on LAN B, and pay special attention to the following
network settings:
•
WAN IP of the remote VPN gateway (for example, 14.15.16.17)
•
LAN IP settings of the remote VPN gateway:
-
IP address (for example, 192.168.0.1)
-
Subnet mask (for example, 255.255.255.0)
-
Pre-shared key (for example, 12345678)
7.
Use the VPN Status screen to activate the VPN tunnel by performing the following steps:
Note:
The VPN Status screen is only one of three ways to active a VPN
tunnel. See
Activate a VPN Tunnel
on page
105 for information
about the other ways.
a.
On the wireless modem router menu, select
VPN Status
. The VPN Status/Log screen
displays: