NETGEAR CGD24N, User Manual, Page: 47 / 84

DOCSIS 2.0 Advanced Cable Gateway CGD24N v2 User Manual
Managing Your Network 4-7
v1.0, August 2009
Running the Ping Diagnostic Utility
You can use the Diagnostics screen to test connectivity to a PC using the ping command.
To start a ping test:
1.
Log in to the gateway as described in “Logging in to the Gateway” on page 1-5 .
2.
In the main menu, under Maintenance, select
Diagnostics
. The Diagnostics screen displays.
3.
Under Ping Test Parameters, enter the following settings:
•
Ping Target
. Enter the IP address of the computer that you would like to ping.
•
Ping Size
. Enter the size of the ping packet.
•
No. of Pings
. Enter the number of times you would like to ping the computer.
•
Ping Interval
. Enter the time you would like to wait between the pings.
4.
Click
Start Test
.To stop the test while in progress, click
Abort Test
.
5.
To see the results of the ping test, click
REFRESH
. To clear the test results after the test has
completed, click
Clear Test
.
Figure 4-6