NETGEAR AC1450 User Manual Download Page 82

Page: 82 / 128

Administration

AC1450 Smart WiFi Router

Manage the Configuration File

The configuration settings of the router are stored within the router in a configuration file. You
can back up (save) this file to your computer, restore it, or reset it to the factory default
settings.

Back Up Settings



To back up the router’s configuration settings:

Select

Advanced > Administration >

Backup Settings

Click

Backup Settings

Specify the location where you want to store the .cfg file.

A copy of the current settings is saved.

Restore Configuration Settings



To restore configuration settings that you backed up:

Select

Advanced > Administration >

Backup Settings

Click the

Browse

button to find the cfg file.

Click the

Restore

button.

The file is uploaded to the router and the router reboots.

WARNING:

Do not interrupt the reboot process.

Summary of Contents for AC1450

































































































































Search results

Summary of Contents for AC1450

Reviews:

Related manuals for AC1450

Brands by name

Popular brands

NETGEAR AC1450, User Manual

Search results

Summary of Contents for AC1450

Reviews:

Related manuals for AC1450

Brands by name

Popular brands