11
PREPARATION FOR USE
The LKG 601 includes a test lead for measuring
Cord Resistance and Case Leakage. No other
cables are required to perform measurements.
Connect the LKG 601 to a 110 VAC outlet (Or
220 VAC for 220-Volt Units).
Before proceeding with any measurement
become familiar with the measurements and the
function selector switch.
During the initial setup the last digit of the LCD
will change gradually due to the time constant of
the RMS to DC converter. The display will
stabilize to zero in a few seconds.
CAUTION
Make sure that the power requirements of the
Device Under Test are within the power ratings
of the LKG 601, 15 amps at 110 volts and 10
amps at 230 volts.
CAUTION
Do not leave the Device Under Test
continuously turned on and connected to the
LKG601
.
