OPERATING INSTRUCTIONS
1.
CORD RESISTANCE MEASUREMENT:
See Figure 2.
•
Set the polarity switch to the off (center)
position.
•
Move the MODE switch to CORD
RESISTANCE. Plug the Device Under Test
into the test outlet.
•
Using the test lead provided, connect the
chassis of the Device Under Test to the
Case Ground jack on the LKG 601.
•
The display will indicate the Power Cord
Resistance in milliohms.
Case Ground
Device Under
Test
Power Cable (DUT)
Figure 2
Block Diagram for Cord Resistance measurement and
Case Leakage measurement (external).
12
