background image

3

 

Copyright

 

 

Copyright © 2002 by Netech Corporation. All rights 
reserved. No part of this publication may be reproduced 
or transmitted in any form other than for the purchaser’s 
personal use without written permission from Netech 
Corporation. 

 

Quality Assurance

 

 

Netech Corporation is ISO 9001-2000 Certified. This 
instrument was thoroughly tested and inspected 
according to Netech’s ISO 9001-2000 quality standards 
and test procedures, and was found to meet those 
specifications when it was shipped from the factory. 

 

Warranty

 

 

Netech warranties the LKG 601 against defects in 
materials and workmanship for one year from the date 
of original purchase. 

The standard warranty is 

extended for a second year if the instrument is 
returned to Netech for its recommended yearly 
recalibration.

 

 

During the warranty period, we will repair or, at our 
option, replace at no charge a product that proves to be 
defective, provided you return the product shipping 
prepaid to Netech Corporation. This warranty does not 
apply if the product has been damaged by accident or 
misuse, or as the result of service or modification by 
other than Netech Corporation, or if its serial number is 
defaced or removed. 

Summary of Contents for LKG 601
























Reviews: