9
CONTROLS AND INDICATORS
1. DISPLAY:
A 3½ Digit LCD indicates the result
of the measurement being made.
2. LEDS:
3 red LEDS indicate the selected test
mode.
3. MODE SWITCH:
Three-position slide switch
to select the test measurement. A lit red LED
indicates the selection.
4. GROUND SWITCH:
A switch to momentarily
open the ground connection to the test
receptacle.
5. POLARITY SWITCH:
A three-position switch
to select the normal and reverse polarity of the
test receptacle. The center position shuts the
power off to the test receptacle.
6. NEUTRAL SWITCH:
A switch to momentarily
open the neutral line to the test receptacle.
7. LOAD SELECTOR SWITCH:
A slide switch
on the right side of the instrument to select
either the AAMI or the IEC 601-1 test load.
8. TEST RECEPTACLE:
A 20 AMP power
receptacle for the Device Under Test.
9. POWER CORD:
The power cord supplies
power to the analyzer and to the Device Under
Test.
