User Manual DigiMano 2500
XIV
Getting Started
Pressure Connection
DigiMano 2500 (Pressure /Vacuum Dual Port Model) is provided with two ports, Port 1
and Port 2 fitted with quick connect fittings. Port 1 is for positive pressure measurements
and Port 2 is for Vacuum measurements. When making Pressure measurements Port 2
must be left open to atmosphere and vice versa when making vacuum measurement.
DigiMano 2500 Gauge pressure /Vacuum single port models have only one port with
1/8”-27 NPT pressure connection.
Measurements
Turn unit power on by pressing the “ON” key. On power up, the display shows the
model and software revision for about 5 seconds and switch to the main menu similar to
the one shown below.
Main Menu Display
Select the desired engineering unit by pressing F2. The selected engineering unit is
saved in the nonvolatile internal memory as default selection on the next power up. The
following engineering units are available.
1.
InH2O …………………Inches of Water Column (20°C)
2.
PSI …………………… Pounds per Square Inch
3.
mBar ………………… Milli Bar
4.
mmH2O……………… Milli Meter of Water (20°C)
5.
mmHg ………………...Millimeters of Mercury Column 0°C)
6.
cmH2O ………………..Centimeter of Water
7.
kPa ……………………KiloPascals
8.
atm ……………………Standard Atmosphere
9.
kg/cm2…………………Kilograms per Centimeter squared.
10.
inHg……………………Inches of Mercury Column (0°C)
P1:
00.
00
PSI
Peak:
00.00
PSI
16:34:45 NOV 19,2014
Peak Set
P
eak
Unit
Zero
Set’p
