DigiMano 2500
Netech Corporation
www.PressureMeter.com
Manual P/N DigiMano User-manual, Rev
3/19/2014
Returning the DigiMano for Re-Calibration
Products returned to Netech for repair or recalibration requires a RMA (Return
Authorization Number) for speedy processing of the service required.
To obtain a RMA number follow the link
http://www.PressureMeter.com
and fill in the
required information, Email
or call 800-547-6557
(US & Canada), International 631-531-0100.
When shipping units to the factory enclose a copy of the RMA and the number
should be on used as the reference in the shipping label.
The shipment should be addressed to:-
Attn: Service Department
Netech Corporation
110 Toledo St.
Farmingdale , New York 11735.
Battery Charging and Replacement
DigiMano 2500 is supplied with a LI-Ion polymer battery and an external charger.
The battery pack contains a PCB with special protection circuit.
Caution:
Do not use any other charger other than the one supplied.
It takes approximately 3 hours to fully charge the battery. When the battery is fully
charged the LED indicator on the charger turns to green.
