background image

 

 

DigiMano 2500 

  

 

 

 

 

 

Netech Corporation 

www.PressureMeter.com

 

Manual P/N DigiMano User-manual, Rev

 3/19/2014 

 

 

 
 
Warranty  

 

Netech warrants the DIGIMANO 2500 against defects in materials and workmanship for one 
year from the date of original purchase. The standard warranty is extended for a second year 
if the instrument is returned to Netech for its recommended yearly recalibration.  
 
During the warranty period, we will repair or, at our option, replace at no charge a product 
that proves to be defective, provided you return the product shipping prepaid to Netech 
Corporation. Only serialized products are covered under this warranty. 
 
This warranty does not apply if the product has been damaged by accident or misuse or as 
the result of service or modification by other than Netech Corporation, or if its serial number 
is defaced or removed. 
  
Netech reserves the right to discontinue the DIGIMANO 2500 at any time, and change its 
specifications, price, or design without notice and without incurring any obligation. Netech 
guarantees availability of service parts for 5 years after the manufacture of the unit is 
discontinued.  
 
The warranty is void if you elect to have the unit serviced and / or calibrated by someone 
other than Netech Corporation. 
 
The warranty covering your product becomes void when the tamper-resistant Quality Seal is 
removed or broken without proper factory authorization.  
 
We strongly recommend, therefore, that you send your instrument to Netech Corporation for 
factory service and calibration, especially during the original warranty period. 
 
The purchaser assumes all liability for any damages or bodily injury, which may result from 
the use or misuse of the unit by the purchaser, his employees, agents, or customers. 
 
 In no event shall Netech Corporation be liable for consequential damages 
 

  
 

 

 

 

Warranty Registration    

Please register to receive special offers, free software updates, and more.  Plus, you'll 
qualify for exclusive complimentary benefits that vary by region.  Any failure to complete 
and submit this registration will not diminish your rights found in the limited warranty that 
accompanied your product at purchase. 

Summary of Contents for DigiMano 2500 Series



























Reviews: