User Manual DigiMano 2500
XVIII
Measurement data is also saved into the internal EEPROM memory (1M) at the elected
data capture rate (0.5 seconds to 15 minutes). Even though more than 10,000 records
can be saved in the memory, it will get full if the data capture rate is set at a fast rate.
When the internal memory is full the data gets overwritten. Therefore it is advisable to
export the data periodically to the PC for future analysis.
Export Data
From the “Setup” Menu select records by pressing F1 Key.
From the “Records” Menu select “Export Data” by pressing
>
Key.
Select (“SEL”) “Export Data” by pressing F1. The data will be exported to the PC and the
following message will be displayed till the export completes and reverts the menu back
to the “Records Menu”
Records
Clock Settings
Back Light
Pressure Control Settings
Sel’
<
>
Exit
Erase Records
Set Capture Rate
Export Data
Pressure Control Settings
Sel’
<
>
Exit
EXPORTING
Please wait
