Air duct
• System DIMMs slots: 2,4, 7, 9, 13, 15, 18, and
20
• NVDIMM slot: 11
The NVDIMM looks significantly
different than system DIMMs.
3. Note the orientation of the DIMM in the socket so that you can insert the replacement DIMM in the proper
orientation.
4. Eject the DIMM from its socket by slowly pushing apart the two DIMM ejector tabs on either side of the
DIMM, and then slide the DIMM out of the socket.
Carefully hold the DIMM by the edges to avoid pressure on the components on the DIMM
circuit board.
5. Remove the replacement DIMM from the antistatic shipping bag, hold the DIMM by the corners, and align it
to the slot.
The notch among the pins on the DIMM should line up with the tab in the socket.
6. Make sure that the DIMM ejector tabs on the connector are in the open position, and then insert the DIMM
squarely into the slot.
48