Net2Phone MAX IP10 User Guide
3
2. IP Phone Mode
The default operation mode of MAX IP10 is IP phone mode (Internet phone mode), and there
are 8 ope rational features: Making an outbound call, answering an incoming call, redialing,
memory dialing, speed dialing, call hold, volume control, and mute.
?
Note: MAX IP10 attempts to confirm the connection with OPAL server periodically, and if it
fails, the phone goes to analog phone mode, where you can make or answer a call via analog
phone line.
?
Note: In IP phone mode, when there is a call from analog phone line, it switches to analog
phone mode. After the call is over, it returns to IP phone mode.
?
Note: Using [PSTN] key, you can switch between IP phone mode and analog phone mode.
2.1. Making a Call
2.1.1. Making a domestic or international Call in IP phone mode
1) Lift handset or press [SPEAKER] key and listen for the dial tone. You will see LCD screen
like Figure 2 -1.
Figure 2-1 Off Hook state
2) Dial the destination phone number. LCD screens the dialed number.
Figure 2 -2 Dialing
When dialing a number in North America, dial: “1 + area code + number.”
When dialing a number outside North America, dial: “011 + country code + area code +
number.”
3) Press the [#] key after entering the phone number. MAX IP10 attempts to connect the call,
and you will see screen like Figure 2 -3 on the LCD.
Figure 2 -3 Connecting
Enter Number
Enter Number
123456789
Connecting…
123456789
