Net2Phone MAX IP10 User Guide
9
2.6. Call Hold
When you want to put connected Net2Phone call on hold and receive the incoming call from
analog phone line, follow these steps:
1) Press [PSTN] key. On the LCD, you will see screen like Figure 2-23.
Figure 2 -23 Analog phone Mode
2) To retrieve the call, press [PSTN] key again. Then you will see screen like Figure 2-24 on
the LCD. You are connected back to the Net2Phone call.
Figure 2 -24 IP phone Mode
2.7. Volume Control
You can control the ring/tone/handset/speaker volumes within each context.
1) Tone volume control
Lift handset or press [SPEAKER] key, and adjust the tone volume using [VOLUME UP] and
[VOLUME DOWN] keys.
a. Handset Tone Volume Control
b. Speaker Tone Volume Control
Figure 2 -25 Tone Volume Control
2) Ring volume control
When the phone is ringing, adjust the ring volume using [VOLUME UP] and [VOLUME
DOWN] keys.
Figure 2 -26 Ring Volume Control
PSTN Call Mode
1234567890
Talk
123456789
Handset Tone
Low ¦¦¦¦¦¦ High
Speaker Tone
Low ¦¦¦¦¦¦ High
Ring Volume
Low ¦¦¦¦¦¦ High
