Net2Phone MAX IP10 User Guide
18
Figure 4-15
Editing TCP Start Port
2) Press [0]~[9] number keys to enter the digits. If you make a mistake, use the [INFO] key to
back up and correct the mistake.
3) After entering all the digits of the TCP start port number, press the [SET] key to confirm the
change.
4) Press the [MENU] key to go to the next field.
4.15. View/Change UDP Start Port
1) After entering the Tport start number, press the [MENU] key. You will see LCD screen like
Figure 4-16.
Figure 4-16
Editing UDP Start Port
2) Press [0]~[9] number keys to enter the digits. If you make a mistake, use the [INFO] key to
back up and correct the mistake.
3) After entering all the digits of the UDP start port number, press the [SET] key to confirm the
change.
4) Press the [MENU] key to go to the next field.
4.16. View/Change Packet Mode
1) Press the [MENU] key until the menu number 16 appears. You will see LCD screen like
Figure 4-17.
Figure 4 -17
Editing Packet Mode
2) Press [VOLUME UP]/[VOLUME DOWN] to change the configurations. If it is different from the
current setting, ‘*’ will disappear
14.Tport Start
4000
15.Vport Start
21000
16.Packet Mode
AUTO*
16.Packet Mode
N2P
16.Packet Mode
RTP
