Max 8 and 8 Plus User’s Guide – Chapter 1
6
If the Max 8 Plus has FXO ports only (for initial
LAN configuration):
The HyperTerminal PC application (included
in all Microsoft operating systems), or an
equivalent terminal-emulator application,
such as Telnet.
A standard serial cable
Hardware Requirements
To use the Max 8 or Max 8 Plus, you will need:
1. A Max 8 or Max 8 Plus unit
2. A corded or cordless analog telephone and from
one to seven ancillary phones
3. A Local Area Network (LAN) with a broadband
connection which
must not
have proxy server
caching
4. A PC or Mac workstation with any recent Web
browser, connected to the LAN (for initial setup
and administration)
5. A Net2Phone account number and PIN
With FXS ports
: a corded or cordless
analog telephone, and additional analog
devices as desired for each port. The Max 8
has all FXS ports. Optional: a PBX, APBX, or
KPS with an analog trunk card installed.
With FXO ports
: a PBX, APBX, or KPS with
an analog line card installed.
A separate port with its own telephone line
connection to the PBX, or to an analog
telephone, is required for each concurrent
telephone call (or conversation) desired. For
example, if the capability for five concurrent
calls is desired, then the Max must have at
least five ports each connected to the PBX
or to an analog telephone.
Summary of Contents for 8 Plus
