Net2Phone 8 Plus, User Manual

Page: 60 / 113

Max 8 and 8 Plus User’s Guide – Chapter 4
52
– Account Configuration Table in the Account
Configuration section on page 37 in this Guide,) must be
configured.
To designate a port to receive incoming Max-to-Max calls,
select the
Y radio button in its Login column.
NOTE: Only one of the ports sharing a
single account may have the Y in its Login
column selected, designating it to receive
calls.
The same account may be entered in all the ports. Each
port can place outgoing calls using the single account,
which may be acceptable when account usage is not
tracked. But note that
only one port has been designated
to receive incoming calls.
Only one call at a time can be made using any
given account number.
Whenever settings on this page are changed, the
Max must be rebooted before the change will
take effect.
See your reseller for Max-to-Max calling rates.
Figure 18 on the following page represents the call-flow in
one type of Max-to-Max telephone call. Other calling
configurations are also possible.
See your reseller for Max-to-Max calling rates.