Thank you for purchasing Authonet.
This Quick Start Guide will guide you through the installation and
configuration of your unit.
• Power Supply
• Ethernet/Internet Cables
To set up your Authonet unit, it only takes a few easy steps:
Connect an Ethernet cable from the WAN port to your router.
Power on the unit by connecting the power supply provided.
Authonet is a business unit (DBA) of Fire4 Systems Inc., a Florida Corporation. Copyright © Fire4 Systems Inc., 2017.
All rights reserved. Fire4, Authonet and the respective logos are registered marks of Fire4 Systems Inc.
All other registered marks, trademarks, service marks and logos are the property of their respective holders.
USB
LAN
WAN
POWER
USB
LAN
WAN
Collision
Power
Collision
Power
