iBypass Switches with Heartbeat
19
1
2
BYPASS
LINK
B
A
1
2
ON
OFF
B
A
1
2
OUT IN
OUT IN
OUT IN
OUT IN
RESET
Network
A
B
1
2
Monitor
To Monitoring Device
To Monitoring Device
Switch
10 GigaBit
Figure 10:
Connecting the Monitoring Devices
Check the Installation
You have connected the iBypass Switch to the network, to the monitoring device
and to power. It should be functioning correctly now. Check the status of the fol-
lowing:
• Check that at least one power LED is illuminated.
• Check the link status LEDs located on the front panel to verify that traffic is
passing through the switch.
• Check the display for utilization and peak information.
• Verify that the monitoring device is receiving traffic from the iBypass Switch.
• Verify that the Management Port is functional by typing the iBypass Switch's
IP address in your Web browser. Net Optics' Web Manager should appear. If it
does not, check the Management Port cables and connections and verify that the
Display option in the CLI is set to ON.
