iBypass Switches with Heartbeat
22
3. Change any Configuration fields. The following table describes the fields on the
Web Manager window. You cannot change the Status or Statistics fields; they
are read-only.
Field Name
Description
Bypass System Status
System Status
Status of the iBypass, UP or DOWN
Link Status
Status of the port Link, UP or DOWN
Port Speed
Speed for the port
Power Supply
Status
Status of the power supply, ON or OFF for this power supply
Bypass State
Indicates the bypass state, ON or OFF
Bypass Model
Indicates the iBypass model number.
Bypass Port Statistics—Port A, Port B, Port 1, Port 2 (Four screen sections)
Peak Rate
Peak traffic rate on the port
Peak Date and
Time
Time of the peak traffic, formatted as:
mm/dd/yyyy hh:mm:ss
Current Utilization
Rate %
The current utilization rate on port
Total Packets
The total number of packets traversing this port since the
last device reset.
Total Bytes
The total number of bytes traversing this port since the last
device reset.
CRC Errors
The number of Cyclical Redundancy Check errors on this
port since the last device reset.
Collision Packets
The total number of link collisions seen by this port since the
last device reset.
Oversize Packets
The total number of oversize packets traversing this port
since the last device reset.
Undersize Packets The total number of undersize packets traversing this port
since the last device reset.
Bypass Configuration
IP Address
IP Address for the iBypass Switch
nnn.nnn.nnn.nnn
. When you
change the IP address, Web Manger lose its connection with
the device; type the new address into the browser's address
bar to connect again.
Net Mask
Netmask for iBypass Switch subnet
nnn.nnn.nnn.nnn
.
