iBypass Switches with Heartbeat
37
iBypass Switch Configure Options
Field Name
Description
IP Address
IP address of the iBypass Switch; the default IP address
is 10.60.0.123. Change the IP address by typing a new
one in the box. When you change the IP address, System
Manager will lose its connection with the device until you
put the new address in the device in the System Frame.
Netmask
The netmask; the default netmask is 255.255.0.0. Change
the netmask by typing a new one in the box.
Manager
IP address of either the host PC running System Manager
over a WAN or the third-party SNMP management tool.
Change the IP address by typing a new one in the box.
Gateway IP Address
IP address of the current WAN gateway. Change the
gateway address by typing a new one in the box.
Port Enable
ENABLE/DISABLE the monitor ports.
Port A Utilization
Threshold
Percentage level at which this port use triggers an alarm;
as default the Port A alarm is triggered when Port A ex-
ceeds 50% utilization.
Port B Utilization
Threshold
Percentage level at which this port use triggers an alarm;
as default the Port B alarm is triggered when Port B ex-
ceeds 50% utilization.
Port 1 Utilization
Threshold
Percentage level at which this port use triggers an alarm;
as default the Port 1 alarm is triggered when Port 1 ex-
ceeds 50% utilization.
Port 2 Utilization
Threshold
Percentage level at which this port use triggers an alarm;
as default the Port 2 alarm is triggered when Port 2 ex-
ceeds 50% utilization.
Reset Port A Peak
Rate
This value is NO unless you change it to YES. If you set
it to YES, as soon as the port reset is complete, it returns
to NO.
Reset Port B Peak
Rate
This value is NO unless you change it to YES. If you set
it to YES, as soon as the port reset is complete, it returns
to NO.
Reset Port 1 Peak
Rate
This value is NO unless you change it to YES. If you set
it to YES, as soon as the port reset is complete, it returns
to NO.
Reset Port 2 Peak
Rate
This value is NO unless you change it to YES. If you set
it to YES, as soon as the port reset is complete, it returns
to NO.
