iBypass Switches with Heartbeat
34
Add Devices to a System Manager Group
To configure and control iBypass Switches with System Manager, you must add
each iBypass Switch to a group. Once you have added an iBypass Switch, you can
configure, modify, and delete it from System Manager.
Note: ____________________________________________________________________
The iBypass Switch must be connected to the network as described in Chapter 2
before it can be added to System Manager.
__________________________________________________________________________
To add an iBypass Switch to the system:
1. Select the group where the iBypass Switch will be added.
2. Click New Device in the toolbar. The New Device dialog box appears.
3. Enter a name for the iBypass Switch in the Node Name text box. Each Node
Name in the system must be unique.
4. Enter the IP address of the iBypass Switch in the IP Address text box. The IP
address must be unique on the network.
5. Enter any relevant information about the iBypass Switch in the Notes text box.
