iBypass Switches with Heartbeat
10
Unpack and Inspect the iBypass Switch
Unpack the iBypass Switch, power supplies, and all cables that are provided. Each
iBypass Switch is delivered with the following:
• 2 Power supplies
• 2 LC fiber cables (fiber models) or CAT5e cables (IBP-HBCU3 model)
• 1 RJ45 CAT5e cable
• 1 DB-9 RS232 cable
• Quick Installation Guide
• CD that contains this manual and System Manager software
You may have also purchased a panel for rack mounting the iBypass Switch, and
an extended warranty. If any component is missing or damaged, contact Net Optics
Customer Service immediately at +1 (408) 737-7777.
Installing XFP or SFP Monitor Port Transceivers
The XFP or SFP transceiver modules for fiber models are packaged separately. You
need to remove the temporary plugs from the iBypass Switch monitor slots and
insert the XFP or SFP modules into the monitor slots, as shown below, until they
click into place.
1
2
BYPASS
LINK
B
A
1
2
ON
OFF
B
A
1
2
OUT IN
OUT IN
OUT IN
OUT IN
RESET
Network
A
B
1
2
Monitor
Switch
10 GigaBit
Figure 5: Insert XFP or SFP Connectors in Monitor Slots
Rack Mount the iBypass Switch (optional)
The iBypass Switch is designed for rack mounting in a two-slot, 19-inch panel.
The mounting panel occupies one rack unit.
To rack mount the iBypass Switch:
1. Attach the two-slot panel to your equipment rack using the thumb screws on
the panel.