iBypass Switches with Heartbeat
28
Set Port Parameters
Use the Port Settings window to enable and disable the ports, and to select whether the
port auto-negotiates for link speed and duplex mode, or select a fixed speed and duplex
setting. Speed selection is only available on the 10/100/1000 iBypass Switch.
All four ports are always set to the same mode. They must be the same in order to pass
traffic successfully.
To set the port parameters:
1. Click Set Port Parameters. The Port Settings window appears.
2. Select Enable or Disable to bring the link up or down.
3. Select Yes to enable link autonegotiation or No for fixed settings.
4. Select the link speed if it is a 10/100/1000 iBypass Switch, Gigabit for
1000 Mbps, 100 BT for 100 Mbps, or 10 BT for 10 Mbps. You must select Yes
for one speed and No for the other two.
5. Select Full or Half for the duplex mode.
6. Double-check your entries and then click Submit Changes. All four ports are set
to the selected mode.
7. Click Go Back to Main Menu to return to the main Web Manager window.
