Ness 16-channel models, User Manual, Page: 64 / 97

User’s Manual
56
Live Monitoring Menu
Login/Logout
Selecting (Login) in the Live Monitoring menu accesses the Login screen, and you will be asked to select a User
and enter the password to log into the system. Selecting (Logout) in the Live Monitoring menu displays the Logout
screen asking you to confirm whether or not you want to log out the current user
.
Monitor
Selecting (Monitor) in the Live Monitoring menu will allow you to select the monitor from Primary , Secondary
and Spot . It is the same as pressing the
MONITOR
button. Selecting Primary displays , Secondary displays
and Spot displays . You can select the screen format and sequence monitoring of the selected monitor.
Display
 Local Camera: Selecting (Display) → Local Camera and choosing the camera number displays the selected
local camera full screen. It is the same as pressing the individual camera buttons on the front panel or clicking the
left mouse button on a camera image when in one of the multiview formats (i.e., 2x2, 3x2, 3x3, 4x3 or 4x4). Clicking
the left mouse button on the screen again returns to the previous display mode.
 Network Camera: Selecting (Display) → Network Camera and choosing the camera number displays the
selected network camera full screen. It is the same as pressing the individual camera buttons on the front panel or
clicking the left mouse button on a camera image when in one of the multiview formats (i.e., 2x2, 3x2, 3x3, 4x3 or
4x4). Clicking the left mouse button on the screen again returns to the previous display mode.
NOTE: “Network Camera” includes both network cameras and network video transmitters.

Screen Format:
Selecting (Display) →
Screen Format
and choosing the screen mode displays the cameras in
the selected multiview screen mode (2x2, 3x2, 3x3, 4x3 or 4x4). Selecting Screen Format while in 4x4 display
format for local cameras enters the display mode for network devices, and selecting Screen Format while in 4x4
display format for network devices enters the display mode for local cameras. Selecting each display mode is the
same as pressing the
DISPLAY
button or scrolling the mouse wheel up and down when in one of the multiview formats.
 Previous Group, Next Group: Selecting (Display) → Previous Group or Next Group moves to the previous
or next page. Selecting Next Group while in 4x4 display format for local cameras moves to 4x4 display format for
network devices, and selecting Previous Group while in 4x4 display format for network devices moves to 4x4 display
format for local cameras.
 Edit Group: Selecting (Display) → Edit Group enters to the Active Cameo mode. It is the same as pressing
the button in any multiview formats. Refer to the following Active Cameo Mode section for details.
 Camera OSD, Status OSD:
Selecting (Display) →
Camera OSD
or
Status OSD
toggles Camera OSD
or Status OSD On and Off.
Freeze
Selecting (Freeze) in the Live Monitoring menu will freeze the current image on the screen until you select again.
It is the same as pressing the
FREEZE
button. While in the Freeze mode, the icon displays in bottom-left corner if
Freeze is selected in the Display setup screen (OSD tab).
Alarm
Selecting (Alarm) in the Live Monitoring menu resets the DVR’s outputs including the internal buzzer during an
alarm. It is the same as pressing the
ALARM
button.
Panic
Selecting (Panic) in the Live Monitoring menu starts panic recording of all cameras, and selecting again stops
panic recording. It is the same as pressing the
PANIC
button.