User’s Manual
34
You can add and edit the SNS account on this screen. The SNS
account can be turned On or Off by highlighting the boxes under
the
No.
heading and pressing the
button.
To add an SNS account, highlight the
+
and press the
button. Highlight the box beside
Type
and press the
button. Selecting
from the Type allows you to post
a tweet on Twitter when an event occurs.
Highlight the box beside
User Name
/
Password
and press the
button. A virtual
keyboard appears allowing you to enter the user name and password.
The SNS accounts can be deleted by highlighting the beside the account and pressing the button.
NOTE: Posting a tweet might fail because of Twitter limitations.
iSCSI
Highlight
iSCSI
and press the
button. The iSCSI setup
screen displays.
Figure 23 : Network – iSCSI setup screen.
Highlight
Use iSCSI Name Service
and press the button to toggle between On and Off.
Highlight the
DVR – Initiator Address
box and press the
button. Use the arrow buttons to enter the IP address of
DVR.
NOTE: You will need to get the IP address from your network administrator.
Do NOT use the same IP address for the
Initiator Address
set here
and
IP address
set during Network –
IP Address setup, otherwise the iSCSI changes will not be saved.
Highlight the
DVR – Initiator Node Name
box and press the
button. A virtual keyboard appears allowing you to
enter the DVR name to be registered on the iSCSI device.
Highlight the
iSCSI – Target Address
box and press the
button. Use the arrow buttons to enter the IP address of
the iSCSI device that you are connecting to the DVR.
Summary of Contents for 16-channel models
Page 1: ......
Page 2: ......
Page 16: ...User s Manual 8 ...
