Neptronic SKG Series, User Manual

Page: 15 / 26

SKG Steam Humidifier
BACnet® Communication Module User Guide
13
SKG Humidifier Object Table
For tank 2:
type inst Object_Name Description range of Present_Value W?
AI 201 Water_Temp2 Water Temperature 2 0-260 °C or 32-500 °F
AI 202 Chimney_Temp2 Chimney Temperature 2 0-260 °C or 32-500 °F
AI 203 Water_Level2 Water level 2 0-120%
AI 204 Burner_Demand2 Burner Demand 2 0.0 - 100.0%
AI 205 Op_Timer_Total2 Operation Timer 2 (Total
time) 1-1677215Hrs
AI 206 Op_Timer2 Operation Timer 2 1-5000Hrs
AI 207 Delay_Autodrain2 Delay until Auto-drain 2 1-100Hrs
AI 208 Foam_Probe_Sensr2 Foam Probe Sensor 2 0-255
AI 209 Burner_Fan_Speed2 Burner Fan Speed 2 0-1000Hz
type inst Object_Name Description range of Present_Value W?
AV 201 Water_Temp_Off2 Water Temperature offset
2 ±0-20 °C or ±0-40 °F W
AV 202 Chimney_Temp_Off2 Chimney Temperature
offset 2
±0-20 °C or ±0-40 °F W
AV 203 Water_Level_Off2 Water Level offset 2 ±0-20% W
type inst Object_Name Description range of Present_Value W?
-- -- -- Alarm 1: -
BV 201 OverTemp_Cont_ON2 Over temperature contact
ON 2 0=Normal, 1=Alarm W
BV 202 Bad_Fill_Tank2 Defective filling tank 2 0=Normal, 1=Alarm W
BV 203 Bad_Refill_Tank2 Defective refill tank 2(too
long) 0=Normal, 1=Alarm W
BV 204 Bad_Drain_Tank2 Defective draining tank 2 0=Normal, 1=Alarm W
BV 205 Bad_Burner_Fan2 Defective Burner Fan 2 0=Normal, 1=Alarm W
BV 206 Bad_Burner_Gas2 Defective Burner Gas
2(Locked) 0=Normal, 1=Alarm W
BV 207 Input_Volt_Low2 Input voltage 2 too low 0=Normal, 1=Alarm W
BV 208 Power_Fuse_Open2 Power Fuse 2 open
(24VAC) 0=Normal, 1=Alarm W
-- -- -- Alarm 2: -
BV 209 Tank_Sens_Bad2 Tank sensor 2 defective 0=Normal, 1=Alarm W
BV 210 Chim_Sens_Bad2 Chimney sensor 2
defective 0=Normal, 1=Alarm W
BV 211 H2OLvl_Prb_Bad2 Water level probe 2 defect 0=Normal, 1=Alarm W
BV 212 Foam_Sens_ON2 Foam Sensor 2 ON 0=Normal, 1=Alarm W
BV 213 OverFlow_DripPan2 Over Flow, Drip Pan 2 0=Normal, 1=Alarm W
BV 214 Tank_Temp_Low2 Tank temper. 2 Too low
(freeze) 0=Normal, 1=Alarm W
BV 215 Tank_Temp_Hi2 Tank temperature 2 too
high 0=Normal, 1=Alarm W
BV 216 Chimney_Temp_Hi2 Chimney temperature 2
too high 0=Normal, 1=Alarm W