POC-300 Series
91
4.9
Select a Boot Device
When you have multiple bootable devices connected to your system and you may
set which device as the first boot device. There are two ways to select the device.
One, press F12 upon system boot up to go to Boot Manager and then select one of
the devices, or two, set a default boot device in the BIOS.
To select a boot device in BIOS:
1.
When system boots up, press F2 to enter BIOS setup utility.
2.
Go to
[Boot]
[Boot Menu]
.
3.
The
[Boot Menu]
option determines whether to list all bootable devices
connected to your system according to device or device type. The default order
of boot device type is
Hard Disk Drive
USB
CD/DVD-ROM Driver
Others
You can use F5/F6 or +/- to change the boot order of devices or device types.
4.
Once set, press
F10
to save setting and exit.
Summary of Contents for POC-300
