POC-300 Series
36
2.2.9
3-Pin Terminal Block for DC Input/ Ignition Input
The system accepts a wide range of DC power input from 8 to 35V via a 3-pin
pluggable terminal block, which is fit for field usage where DC power is usually
provided. The screw clamping mechanism on the terminal block offers connection
reliability when wiring DC power.
In addition to DC power input, this terminal block can also accept ignition signal input
(IGN) when ignition control module (eg. MezIO-V20) is installed for in-vehicle
applications.
WARNING
Please make sure the voltage of DC power is correct before you connect it to the
system. Supplying a voltage over 35V will damage the system.
Summary of Contents for POC-300
