POC-300 Series
61
4. To install, match the three (3) screw holes (indicated by black arrows) to the
standoffs and the MezIO
TM
port, gently lower the module onto the PCBA. The
MezIO
TM
port should engage if the three (3) standoffs and screw holes meet.
Then using the three (3) screws supplied, secure the module by fastening a
screw on each standoff.
5. If you are installing a new MezIO
TM
module into your system, you’ll need to
remove the I/O shield opening for the connector.
6.
Reinstall the system enclosure
.
Summary of Contents for POC-300
