POC-300 Series
85
4.3
SATA Interface Speed
The system
’s SATA controller supports three modes of operations, <Gen1>, <Gen2>
and <Gen3>. Gen 1 SATA mode offers bandwidth throughput of up to 150MB/s; Gen
2 SATA mode offers bandwidth throughput of up to 300MB/s; Gen 3 SATA mode
offers bandwidth throughput of up to 600MB/s. For systems with only mSATA module
installed, Gen 2 is recommended. For systems with MezIO-R11/ R12 and 2.5
” SSD,
you can set this option to Gen2/ Gen3 according to SSD
’s specifications.
To set Chipset SATA mode:
1.
Press
F2
when the system boots up to enter the BIOS setup utility.
2.
Go to
[Advanced]
[SATA Configuration]
.
3.
Set the
[SATA Interface Speed]
option to the desired mode.
4.
Once set, press
F10
to save setting and exit.
Summary of Contents for POC-300
