POC-300 Series
51
3.1
Disassembling the System Enclosure
To install necessary components such as DDR3L memory, mSATA and/ or MezIO
TM
module, you need to disassemble the POC-300 system enclosure:
1.
To disassemble POC-300, unfasten the three (3) screws shown in the
illustration A and the two (2) screws shown in illustration B, below.
Illustration A
Illustration B
2.
Gently slide the L-shaped enclosure open to gain access to internal I/O
connectors.
Summary of Contents for POC-300
