POC-300 Series
73
3.7.4
Powering On Using Wake-on-LAN
Wake-on-LAN (WOL) is a mechanism to wake up a computer system from a S3
(standby), S4 (Hibernate) or S5 (system off with standby power) state via issuing
Subnet Directed Broadcasts (SDB) or a magic packet. The system implements the
Wake-on-LAN function for the GbE port #3 shown below.
To enable WOL function and power on your system, please follow the steps below.
1.
Press F2 when the system boots up to enter BIOS.
2.
Enter the
[Power]
menu. And configure the
[Wake On LAN]
option as
[Enabled]
. Please refer to the
Wake-on-LAN
section.
Summary of Contents for POC-300
