manualshive.com logo in svg

Neopost IJ-15K, Manual

Share
Download
Neopost IJ-15K Manual Download Page 69

Machine configuration printing (Supervisor mode)

69

ORIG0060-69

4131934X/C

17/09/2008

2.4

Display setup

This mode is accessible in User and Supervisor modes.

See the paragraph "Configuration of the main screen display" in
C section.

2.5

Departments

DEPARTMENT: is used to enable the department mode. This
functionality is proposed to allow the user to allocate the postage
spending to the corresponding department. When this mode is
activated, the DEPARTMENT menu is displayed on the main screen.

The machine default is DEPARTMENT 

OFF

; in order

to use the departments, select DEPARTMENT 

ON

(by touching it). Validate with 

OK

. You should then

select DEPARTMENT in the main supervisor menu to
open and define the departments you want to use (see  on
previous page).

The machine is configured by default as follows:
- 0000 PIN code for all departments opened by the supervisor,
- With names from D1 to D499 corresponding from 1 to 499.

In the "no department" mode, all the values are assigned to a
miscellaneous department (D0 MISCELLANEOUS) which cannot
be accessed by the user. This department will be reset with the other
ones, when the registers are cleared. This department appears on the
printed reports.
After selecting "DEPARTMENT" in the main supervisor menu,
the following menu is displayed:

All manuals and user guides at all-guides.com

Summary of Contents for IJ-15K














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands