manualshive.com logo in svg

Neopost IJ-15K, Manual

Share
Download
Neopost IJ-15K Manual Download Page 63

Machine configuration printing (Supervisor mode)

63

ORIG0060-63

4131934X/C

17/09/2008

2.3.4 Time-out

Time-out, standby and sleep

After selecting  "TIME OUT" in the main supervisor menu, the
screen below is displayed:

SUP

START (10 - 9999)

SLEEP (30 - 9999)

STANDBY  (1 - 9999)

STOP (1 - 9999)

TIMEOUT (SEC) 

ESCAPE

0015

0015

0015

0015

1800

1800

0240

0060

+

-

-

-

-

+

+

+

NEXT

SUP

WARNING STOP (0 - 240)

TIMEOUT (SEC) 

ESCAPE

0015

120

+

-

PREV

The timeout delays, expressed in seconds, are determined by the
supervisor (between 0 and 3600 seconds, in one second
increments).  The maximum delay is 3600 seconds or 60 minutes:

START : waiting time for the first document with the transport
motor in operation. After this time out the machine stops.
STOP : time out before the machine stops after the last document
processing.

These two time out will be inhibited if their value is 0.

All manuals and user guides at all-guides.com

Summary of Contents for IJ-15K














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands