Neopost IJ-15K, Manual

Page: 25 / 109

Entering Postage Value and Mail Processing 25
ORIG0060-25
4131934X/C
17/09/2008
To configure postage class settings in Supervisor mode:
- On the main screen, touch the BATCH CONFIG button.
One setting is displayed on the BATCH CONFIGURATION
tab if the inserter is not connected ( NOT CONN. ).
HOME OK
FRAC... BATCH CONFIGURA... MODE
SETTING A
SETTING A
SETTING A
LABEL
LOGIN
PRSRT FIRST-CLASS MAIL 00.123
NOT ACTIVE
- Press
SETTING A
SETTING A
to preset the SETTING A configurations.
Three settings are displayed on the BATCH CONFIGURATION
tab if the inserter is connected ( ELECTRO or SERIAL ).
HOME OK
FRAC... BATCH CONFIGURA... MODE
SETTING A
SETTING A
SETTING A
SETTING B
SETTING A
SETTING C
SETTING A
LABEL
LOGIN
PRSRT FIRST-CLASS MAIL 00.123
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
- Press
SETTING A
SETTING A
to preset the SETTING A configurations.
- Continue to preset the desired postage class configurations for
SETTING A , SETTING B, and SETTING C .
When the serial interface is activated, the label dispenser
is automatically disabled.
All manuals and user guides at all-guides.com