manualshive.com logo in svg

Neopost IJ-15K, Manual

Share
Download
Neopost IJ-15K Manual Download Page 65

Machine configuration printing (Supervisor mode)

65

ORIG0060-65

4131934X/C

17/09/2008

Timeout AUTO CLEAN

To access the AUTOCLEAN TIME-OUT:

- press 

MENU

  from the main screen, and select HEADSET

CLEANING

- press 

OK

 to confirm;

The following screen will appear:

SUP

THRESHOLD (SEC.)

TIME OUT (SEC.)

0015

30

+

-

-

+

HOME

HOME

LOGOUT

OK

WARNING THRESH. (SEC.)

-

+

0015

2700

0015

120

HEADSET CLEANING

DISPL...

THRESHOLD is used regardless of the inserter mode (connected
or not connected). This threshold is set to 45 minutes by default.
It determines the timing between two headset cleaning. When this
threshold is reached, headset cleaning is launched.

This TIME OUT period is used in the inserter mode "Not connected".
It is set to 600 seconds by default. This timeout period is used to
launch a headset cleaning when the mailing machine does not
detect a document for the amount of time specified, and if the
number of documents printed is higher than 70% of the
THRESHOLD value.

The WARNING THRESHOLD is used to activate the flashing
yellow light on the Status Light Tower (page 41) prior to
commencing the headset cleaning process.

All manuals and user guides at all-guides.com

Summary of Contents for IJ-15K














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands