manualshive.com logo in svg

Neopost IJ-15K, Manual

Share
Download
Neopost IJ-15K Manual Download Page 18

Overall presentation

18

ORIG0060-18

4131934X/C

17/09/2008

1.2.3 Ink reservoir and printhead

It is possible to replace the reservoir when the machine is OFF or
while machine is running until the final "ink out" message appears.
To prevent unpriming of the system, this operation should last less
than one minute. If it takes longer, the machine will stop automaticaly
untill the user completes the operation and restarts the machine.
It is possible to replace the printhead when the machine is
switched on (no possibility when the machine is OFF).

WHEN TO REPLACE INK RESERVOIR OR
PRINTHEAD

- When the message "ink low" is displayed, printing may continue;
- When the message "ink very low" is displayed, printing may

continue, but it is strongly recommended to replace the ink
reservoir;

- When the message “ink out” appears, ink reservoir must be

replaced before continuing operation.

In the first and second cases, it is possible to replace the
ink reservoir while machine is running.

INK RESERVOIR REPLACE-
MENT PROCESS

If the machine is not running,
switch machine OFF, then:

- Open the reservoir

door 

(1)

.

- Press on the front of

the ink reservoir 

(2)

,

then on the right hand
side 

(3)

 in order to

remove it.

(1)

(2)

(3)

All manuals and user guides at all-guides.com

Summary of Contents for IJ-15K














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands