manualshive.com logo in svg

Neopost IJ-15K, Manual

Share
Download
Neopost IJ-15K Manual Download Page 2

2

ORIG0060-2

4131934X/C

17/09/2008

WARNING!

Do not remove any secured covers or attempt to repair the IJ-15K by
yourself, there are no user serviceable parts contained and the IJ-15K
product is licensed for use only under the conditions of the Post Office
rules. This license is issued subject to the product being secure at all
times. Any removal of covers or dis-assembly of the product will result
in the license being revoked and may result in the Post Office
requesting Neopost to remove the product from use.

The inking system used within the IJ-15K contains Post Office
approved ink. This cartridge should not be tampered with in any way
or the use of non approved inks be attempted. This will breach any
Post Office licence agreement on the product and may result in the
Post Office requesting Neopost to remove the product from use.

FCC COMPLIANCE STATEMENT

This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with this
instruction manual, may cause harmful interferences to radio com-
munications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case the user will be required
to correct the interferences at his own expense.
The internal modem of this equipment complies with Part 68 of the
FCC rules.

INSTALLATION

The power plug on this equipment is intended to serve as the device
for isolation of the electrical supply. The equipment should be installed
in close proximity to easily accessible electrical outlet and telephone
wall connector.

No part of this document may be reproduced or transmitted in any
form or by means, electronic or mechanical, for any purpose without
the express written permission of Neopost.

Copyright© Neopost 2006

All manuals and user guides at all-guides.com

Summary of Contents for IJ-15K














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands