Radiator Laser Synthesizer
User Manual
Rear Panel Jacks and Controls
•
POWER
– Main power switch. Make sure to shut down the system before turning off.
•
DC IN
– Power input for 12-24VDC. Please only use the included power supply.
•
AUDIO IN
(L and R) – Audio inputs on 1/4” TRS connections for sound-reactive effects.
•
LFO OUT
(1, 2 and 3) – LFO CV outputs on TS minijacks. Output range is -5V to +5V.
•
CV IN
(1-6) – CV inputs on TS minijacks used to control the LFO modules.
•
X/Y OUT
– The laser X/Y output on TRS stereo minijack for listening to the laser output.
•
ILDA OUT
– ILDA analog output on DB-25 pin connector for use with ILDA projectors.
•
MIDI IN
– MIDI input on standard 5-pin DIN jack.
•
MIDI OUT
– MIDI output on standard 5-pin DIN jack.
•
USB
– Dual USB host ports. Use for USB storage and LaserDock/LaserCube only.
•
NETWORK
– 10/100BASE-T Ethernet port for Ether Dream support.
•
SYSTEM
– Micro-USB device port for system upgrade or restore.
•
HDMI OUT
– HDMI full-size output port for laser visualizations. Outputs 1080p60 signal.
Software ver. 1.0 and above - 2020-09-03
Page 7 of 66
www.neoncaptain.com
Figure 2: Radiator Rear Panel