Radiator Laser Synthesizer
User Manual
Transformer Source
The transformer source is used to select which sources are used for transforming. You can select one or
both shape generators, or none. In the None mode it is possible to generate patterns using LFOs and
other techniques. Please note that the source chosen affects how shape blanking is processed. Shape A
is used for blanking in all cases unless only Shape B is selected.
Transformer Parameters
Parameter
Description
Warp
Adjusts the amount of warp affect applied.
Rotate Offset
Adjusts the offset center of rotation.
Type
Selects the tranform type.
Source
Selects the source of input for the transformer.
Axis Tilt
Adjusts the amount of axis tilt for the rotation effect.
Rotation
Adjusts the rotation speed.
LFO1 Warp
Adjusts the LFO1 to warp level.
LFO1 Rot Offset
Adjusts the LFO1 to rotate offset level.
LFO1 Axis Tilt
Adjusts the LFO1 to axis tilt level.
LFO1 Rotation
Adjusts the LFO1 to rotation level.
LFO2 Warp
Adjusts the LFO2 to warp level.
LFO2 Rot Offset
Adjusts the LFO2 to rotate offset level.
LFO2 Axis Tilt
Adjusts the LFO2 to axis tilt level.
LFO2 Rotation
Adjusts the LFO2 to rotation level.
LFO3 Warp
Adjusts the LFO3 to warp level.
LFO3 Rot Offset
Adjusts the LFO3 to rotate offset level.
LFO3 Axis Tilt
Adjusts the LFO3 to axis tilt level.
LFO3 Rotation
Adjusts the LFO3 to rotation level.
Software ver. 1.0 and above - 2020-09-03
Page 25 of 66
www.neoncaptain.com