Radiator Laser Synthesizer
User Manual
on the LCD screen. When Follow Control mode is turned on in the Util menu, touching any
control on a module will cause the screen display to select the module automatically.
•
Exit a Screen Display
- To exit any screen and go back to the main screen double-tap SHIFT.
•
Fine-tune a control
– Hold SHIFT and turn a control to adjust it with finer resolution. This can
be particularly useful for frequencies of shape and LFO generators.
•
Assign an LFO destination
– Hold an LFO select button and turn the control on another
module to assign the LFO. Adjusting the control affects the LFO depth into this control.
•
Store a preset
– Hold SHIFT and press STORE to arm the presets for storing. Select the page
you wish to use and tap the preset button where the preset should be stored.
•
Adjust which modules are stored in a preset
– It is possible to store only some modules in a
preset. After arming to store, hold SHIFT and press module SELECT buttons to choose which
modules are stored.
•
Display the Preset screen when
Follow Control
mode is off
– Hold SHIFT while turning the
PAGE knob to bring up the preset screen.
•
Reset a module
– Hold RESET and press a module SELECT button to reset the module to the
default settings.
•
Reset a single control
– Hold RESET and turn a control to reset it to the default settings.
•
Reset the shape autorotate phase
– Reset the single control or turn off Autorotate twice using
the shape screen.
•
Reset all LFO inputs on a module
– Select a module and then hold RESET and tap the LFO
SELECT button to reset inputs from that LFO to the selected module.
•
Reset the entire preset
– Hold SHIFT and press RESET to reset all modules to default settings.
Software ver. 1.0 and above - 2020-09-03
Page 12 of 66
www.neoncaptain.com
