Radiator Laser Synthesizer
User Manual
Color
The Color screen is used to add color to shapes. It is the last module in the signal path before it reaches
the master section. Color can be taken either from the shape generators themselves if the original
shapes contain color, or a unique color can be generated using either RGB or HSV color mixing. A
number of color “mod” effects can be used to alter the selected color. The top left of the color screen
shows a color picker and preview of the selected color. Color mod types are listed in Appendix C.
Color Selection
Unless the mod type is selected to use the original color from a shape generator, the color selected by
using the HSV or RGB controls. It is possible to mix colors using either an HSV or RGB colorspace.
By using LFOs and the mod effects the basic chosen color can be modified to create multi-color
effects. By selecting the mod types which support original color input from the shape generators, it is
possible to use the original color from a selected shape.
Mod Types
To allow more variations of color than just using the LFO inputs, the mod types apply complex color
Software ver. 1.0 and above - 2020-09-03
Page 14 of 66
www.neoncaptain.com
Figure 3: Color Screen
