Hangzhou NeoDen Technology Co.,Ltd.
18
2.1.5 Feeders setting page
See figure (2.1.5) feeders setting page
Function: all components’ setting on this files list, like: nozzle selecting, stack setting, the
location of pick components, adjustment setting, and others components’ setting all need be
finished here.
Figure (2.1.5)
2.1.5.1 Feeder arrangement
The first thing you see on the top and bottom of the page and on the left is the stack number, on
the top page is 33-64 stacks, on the down page is 1-39 stacks and 65-74 stacks is IC tray, this is
the idea configuration, the number of stacks will be decreased based on actual feeders’ width
which you choose, For instance, there have many components’ information on the components
list, choose a stack at will, there is a pull down menu, click it , it will appear all components’
information and specification on the stack list, Selecting a drop-down list will result in one less
item, every stack can be operated like this.
2.1.5.2Feeder information configuration
Choose a stack, click the “apply” in the top left corner, this stack’s configuration function is to
unlocked , then
the information can be modified, there are 5 contents on this
page ,respectively are: the information of nozzles, the information of feeders , the basic
information of stack, the information of IC tray and the stack exchange, one of IC tray and
feeders’ options will at closing state according to the different of stack. The operation order of
these setting is: the information of feeders (IC tray) → the basic information of stack → the
information of nozzles, exchange stack need to base on the actual situation, if find installing
the tape reel wrongly, use exchange stack.
●
the information of IC tray
Summary of Contents for 7
Page 4: ......